The Reloop RP-7000 mk2 Black is a Professional Upper Torque Turntable System

With the Reloop RP-7000 mk2 Black, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

– NextGen Turntable for professional Club DJs and Turntablists
– Power-Torque Direct Drive with precise motor control and stable rotation
– Extra-heavy body design with high-rigidity for excellent damping, isolation and sound

Sturdy Casing Construction
By using a combination of metal, rubber and synthetic materials, the Reloop RP-7000 mk2 Black’s housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metalic finish.

Balanced S-Shaped Tone Arm with Upgraded Tone Arm Base
The Reloop RP-7000 mk2 Black features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

Dual Start/Stop Buttons, Precise Motor Control and Reverse Function
As well as the above technical innovations, the Reloop RP-7000 mk2 Black is equipped with a few functions that will make any DJ’s life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the Reloop RP-7000 mk2 Black’s top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

High-Resolution Pitch Section with Digital Fader
Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the Reloop RP-7000 mk2 Black is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record’s tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

High-Quality Connections and Integrated Phono Pre-Amp
Thanks to the recessed rear connection panel, the Reloop RP-7000 mk2 Black can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

Powerful Motor with Extensive Adjustment Possibilities
The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 – 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

– Built for the club: Rigid chassis construction with an even heavier design with additional reinforcements out of metal, rubber and moulding compound for high vibration damping and isolation
– More powerful starting torque (adjustable from 2.8 – 4.5 kg/cm)
– Fine-tuned motor control for further optimization of wow and flutter and rotation
– Newly developed, height-adjustable tone arm base (VTA) and Anti-Skating control
– Particularly light weight and rigid, satin aluminium material used for tone arm
– Adjustable Pitch scale for precise adjustments
– Optional ground terminal offers additional protection in complex club & studio environments
– Easily replaceable, freely rotatable LED needle light in new aluminium design
– High-quality and hard-wearing deep black, metallic finish
– Quartz driven DJ turntable with upper-torque direct drive
– Adjustable stop speed (0.2 – 6 sec.)
– Precise control of motor with 3 speeds (33 1/3, 45 & 78 RPM)
– Precision manufactured, die cast aluminium turntable
– Rubber inlays to reduce vibrations and background noise
– Static-balance universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
– Universal connection for pickup systems (SME)
– Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)
– Quartz lock
– Additional start/stop button for vertical positioning
– Reverse function: switch for forwards and reverse operation
– Recessed connection cavity for easy installation in cases & seamless adjustment
– Phono and line out (no earth required)
– Removable mains and Cinch cable
– Safety mains switch
– Shock-absorbing feet to insulate against vibrations

Technical Data
– Type: direct-drive turntable
– Drive: quartz driven upper-torque direct drive
– Motor: 16-pole, 3-phase, brushless motor
– Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
– Starting torque: 2.8 – 4.5 kg/cm (adjustable)
– Adjustable stop time (0.2 – 6 sec.)
– Start-up time / change to RPM: 55dB (DIN-B)
– Brake system: electronic brake

– Material: die cast aluminium
– Diameter: 332 mm
– Weight: approx. 1.5 kg

Tone arm:
– Type: universal, static balanced, S-shaped
– Effective length: 230 mm
– Overhang: 15 mm
– Tracking error range: < 3°
– VTA setting range: 0-6 mm
– Useable weight of pickups: 3.5~8.5 g (incl. headshell 13~18 g)
– Anti-skating range: 0 – 3 g
– Effective tone arm mass: 30 g
– Connections: 1x PHONO/LINE Out (gold-plated), 1x GND earth connection

– Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
– Power consumption: 13 W
– Dimensions: 458 (W) x 354 (D) x 144,6 (H) mm
– Weight: approx. 11.7 kg

Accessories included:
– turntable
– slipmat
– LED needle light
– counterweight
– PHONO C inch cable with earth
– AC mains adapter
– operating instructions

Descrizione in Italiano:

Con il nuovo Reloop RP-7000 mk2 Black, Reloop ha costruito un giradischi che soddisfa le necessità anche dei DJ professionisti e dei locali più esigenti.
Il potente motore a trazione diretta e una costruzione robusta, rendono questo giradischi indistruttibile e capace di sopportare anche i carichi di lavoro più duri.

Grazie ad una combinazione di metallo, gomma e materiali sintetici, l'alloggiamento di Reloop RP-7000 mk2 Black è più rinforzato e pesante che mai, e i piedini di appoggio ammortizzanti aiutano a migliorare ulteriormente l'isolamento.

Reloop RP-7000 mk2 Black è dotato di un braccetto a S bilanciato staticamente, con sollevamento idraulico e sistema anti-skating, torretta con nuova base maggiormente stabile e con altezza /angolo di tracciamento verticale (VTA) regolabile. Il braccetto a bassa risonanza è dotato di connettore universale per Shell con standard SME.

In aggiunta alle innovazioni tecnologiche, Reloop RP-7000 mk2 Black dispone di funzioni in grado di facilitare la vita di un DJ. Nuova search light in alluminio ruotabile ed estraibile, doppio pulsante Start / Stop perfetto per l’utilizzo in verticale, 3 velocità selezionabili (33 1/3, 45 & 78 rpm), pulsante reverse.

Grazie alle tre velocità selezionabili (+/-8%, +/-16% e +/-50%) e al cursore pitch ad alta risoluzione, il beatmatching diventa più preciso, e consente di realizzare facilmente mixaggi complessi e creativi.

Reloop RP-7000 mk2 Black è dotato di uscite con connettori RCA placcati oro e preamplificatore RIAA con selettore phono/line.
Per facilitare il posizionamento all’interno di flight case o in consolle, i connettori sono collocati in modo da non sporgere dal bordo del giradischi.
Tutti i cavi di collegamento sono scollegabili, per facilitare le operazioni di trasporto e riposizionamento dopo l’utilizzo.

Il motore estremamente preciso controllato al quarzo con correzione del pitch automatica, ha una coppia iniziale di 2,8 kg/cm, regolabile fino ad un massimo di 4,5 kg/cm.
Questo rende la rotazione estremamente fluida con wow e flutter di appena 0.01% WRMS*. Inoltre, la velocità di avvio/arresto del piatto può essere regolata da 0,2 a 6 secondi, e il piatto in alluminio pressofuso, lavorato con precisione e rivestito con gomma, riduce le vibrazioni e le risonanze indesiderate.

• Perfetto per l’utilizzo nei club grazie al telaio ancora più robusto e pesante, rinforzato esternamente con metallo, gomma e componenti stampati ad
elevato isolamento dalle vibrazioni
• Maggiore coppia iniziale, regolabile da 2.8 a 4.5 kg/cm
• Rotazione estremamente fluida per wow e flutter di appena 0.01%
• Torretta con nuova base maggiormente stabile e altezza / angolo di tracciamento verticale (VTA) regolabile. Controllo dell’Anti-Skating migliorato
• Braccetto in alluminio satinato particolarmente leggero e rigido
• Pitch con scala dettagliata dei valori
• Vite per il collegamento a massa
• Searchlight ruotabile i

Reloop RP-7000 mk2 Black Reloop RP-7000 mk2 (black)


Approfitta della spedizione gratuita!

Immediatamente Disponibile in Magazzino, Pronta Consegna!